Cisco CISCO1701-K9-RF Hardware Installation Guide - Page 121
Foreign Exchange Office (FXO) Interface Cards
UPC - 746320858944
View all Cisco CISCO1701-K9-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Voice Interface Cards Figure 82 Connecting an FXS Card RJ-11 ports IN USE IN USE VIC FXS 1 SEE MANUAL BEFORE INSTALLATION 0 Straight-through RJ-11-to-RJ-11 cable Foreign Exchange Office (FXO) Interface Cards 41197 Step 3 Fax machine Connect the other end of the cable to the RJ-11 port on the telephone or fax machine. Foreign Exchange Office (FXO) Interface Cards A Foreign Exchange Office (FXO) interface connects local calls to a central office or PBX. This is the interface a standard telephone provides. This type of card is illustrated in Figure 83, Figure 84, and Figure 85. The VIC-2FXO and VIC-2FXO-M1 interface cards are intended for use in North America (United States, Canada, and Mexico). The VIC-2FXO-EU and VIC-2FXO-M2 interface cards are intended for use in Europe. The VIC-2FXO-M3 interface card is intended for use in Australia. The VIC2-2FXO and VIC2-4FXO interface cards are software-configurable for all regions (see Figure 84 and Figure 85). Caution To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety, connect the 2-port FXO card (VIC2-2FXO) only to intra-building or non-exposed wiring or cabling. The intrabuilding cable must be shielded and the shield must be grounded at both ends. Warning This equipment contains a ring signal generator (ringer), which is a source of hazardous voltage. Do not touch the RJ-11 (phone) port wires (conductors), the conductors of a cable connected to the RJ-11 port, or the associated circuit-board when the ringer is active. The ringer is activated by an incoming call. OL-12847-01 5