Cisco CISCO1701-K9-RF Hardware Installation Guide - Page 46
Removing Interface Card Slot Dividers, Removing a Slot Divider from a Cisco 2811
UPC - 746320858944
View all Cisco CISCO1701-K9-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Installing Cisco Interface Cards in Cisco Access Routers Installing Cisco Interface Cards in Cisco Access Routers Removing Interface Card Slot Dividers Slot dividers are removed to permit use of double-wide interface cards in modular router slots. To determine whether you need to install or remove slot dividers on your Cisco access router, see Table 6. To remove slot dividers from network module slots from Cisco 2811, Cisco 2821, Cisco 2851, and Cisco 3825 series routers, perform the following steps: Step 1 Step 2 Remove any installed interface cards and blank faceplates from the router slot you plan to use. Reach into the interface card slots on both sides of the slot divider, and squeeze the two halves of the slot divider together. (See Figure 24.) Figure 24 Removing a Slot Divider from a Cisco 2811, Cisco 2821, Cisco 2851, or Cisco 3825 Series Router 117044 Step 3 Pull the slot divider straight out of the interface card slot. To remove slot dividers from network module slots from Cisco 2801 and Cisco 3845 routers, perform the following steps: Step 1 Step 2 Step 3 Remove any installed interface cards and blank faceplates from the router slot you plan to use. Loosen the retention screw on the slot divider. Pull the slot divider straight out of the interface card slot. OL-12842-01 14