Cisco ESW-540-8P Administration Guide - Page 320
Modifying Bandwidth Settings, Status, Disable, Rate Limit, Bandwidth
UPC - 882658304057
View all Cisco ESW-540-8P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
Configuring Quality of Service Defining General Settings 12 • Ingress Rate Limit - Indicates the traffic limit for ingress interfaces. The possible field values are: - Status - Enables or disables rate limiting for ingress interfaces. Disable is the default value. - Rate Limit - Defines the rate limit for ingress ports. Defines the amount of bandwidth assigned to the interface. For FE ports, the rate is 62 - 100,000 Kips. For GE ports, the rate is 62 - 1,000,000 Kbps. • Egress Shaping Rates - Indicates the traffic shaping type, if enabled, for egress ports. The possible field values are: - CIR - Defines Committed Information Rate (CIR) as the queue shaping type. The possible field values are: For FE ports, the rate is 64 - 62,500 Kbps. For GE ports, the rate is 64 - 1,000,000 Kbps. - CbS - Defines Committed Burst Size (CbS) as the queue shaping type. CbS is supported only on GE interfaces. The possible field value is 4096 - 16,769,020 bytes. - Status - Enables or disables rate limiting for egress interfaces. Disable is the default value. Modifying Bandwidth Settings STEP 2 Click Quality of Service > General > Bandwidth. The Bandwidth Page opens: STEP 3 Click the Edit button. The Edit Bandwidth Page opens: ESW 500 Series Switches Administration Guide 309