Cisco PAP2T User Guide - Page 11
Using the Phone Adapter’s Interactive Voice Response Menu, Overview, Accessing - configuration menu
View all Cisco PAP2T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Internet Phone Adapter with 2 Ports for Voice-over-IP Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu Overview You may need to manually configure the Phone Adapter by entering the settings provided by your Internet phone service provider. This chapter explains how to use the Interactive Voice Response Menu to configure the Phone Adapter's network settings. You will use the phone's keypad to enter your commands and select choices, and the Phone Adapter will respond with voice responses. NOTE: If your Internet phone service provider sent you the Phone Adapter, then it may be pre-configured for you, and you may not need to change any settings. Refer to the instructions provided by your service provider for more information. Accessing the Interactive Voice Response Menu 1. Use a telephone connected to the PHONE 1 or PHONE 2 port of the Phone Adapter. 2. Press the * (star) key four times. 3. Wait until you hear "Configuration menu. Please enter option followed by the # (pound) key or hang up to exit." 4. Refer to the table on page 8 for a list of actions, commands, menu choices, and descriptions. After you select an option, press the # (pound) key. To exit the menu, hang up the telephone. Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu 7 Overview