Cisco SGE2010P Administration Guide - Page 20
Serial Port Configuration, Telnet Configuration - serial port settings
UPC - 745883581283
View all Cisco SGE2010P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Using the Console System Configuration Serial Port Configuration Use the Serial Port Configuration screen to view or change the baud rate of the Ethernet switch. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration Menu. 2. From the System Configuration Menu, select 2. Management Settings. 3. From the Management Settings Menu, choose 1. Serial Port Configuration. To change the baud rate of the serial port: 1. Select Edit, and then make changes. 2. Press the Esc key to move the cursor to the Action list. 3. Select Save to save your changes. 4. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. Telnet Configuration Use the Telnet Configuration screen to view or change the time-out settings. SGE2010/SGE2010P Administration Guide 17