Cisco SGE2010P Administration Guide - Page 62

E Specifications Model Ports Cabling Type Switching Capacity Forwarding Capacity LEDs Stack Operation Buttons Layer 2 options Layer 3 options • SGE2010 48-port 10/100/1000 Ethernet Switch • SGE2010P 48-port 10/100/1000 Ethernet Switch with PoE • IEEE 802.3af PoE on delivered over any of the 48 10/100 ports • Power budget allows for max power of 15.4W to an Ethernet port, with 360W available to all ports on regular AC, and 280W available on redundant power supply 48 RJ-45 connectors for 10BASE-T/100BASE-TX/1000Base-T with 4 Gigabit combo ports shared between mini-GBIC ports Console port Auto MDI/MDI-X Autonegotiate/Manual setting RPS port for connecting to Redundant Power Supply unit UTP CAT 5 or better for 10BASE-T/100BASE-TX, UTP CAT 5e or better for 1000BASE-T 96 Gig non-blocking 71.4M packets per second (64-byte packets) Power, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 - 8 • Up to 192 ports in a stack • Hot Insertion and removal • Ring and Chain stacking options • Master and Backup master for resilient stack control • Auto-numbering or manual configuration of units in stack Reset Button 8K 256 active VLANs (4096 range) Port-based and 802.1Q Tag-based VLANs Protocol-based VLAN Management VLAN Multicast TV VLAN Private VLAN Edge (PVE) GVRP Head of line blocking prevention Static Routing CIDR (Classless Interdomain Routing) 60 Static Routes IPv4 and IPv6 Forwarding in silicon - Wirespeed forwarding of layer 3 traffic SGE2010/SGE2010P Administration Guide 59