Cisco SPA112 Administration Guide - Page 89
Etsi Fsk: Cid, Cidcw, And Vmwi, Etsi Fsk With Pr Uk - fxs port power limit
View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Configuring Voice Configuring Voice Settings 4 Field Caller ID Method FXS Port Power Limit Caller ID FSK Standard Description The choices are described below. Default setting: Bellcore(N.Amer, China) • Bellcore (N.Amer,China): CID, CIDCW, and VMWI. FSK sent after first ring (same as ETSI FSK sent after first ring) (no polarity reversal or DTAS) • DTMF (Finland, Sweden): CID only. DTMF sent after polarity reversal (and no DTAS) and before first ring. • DTMF (Denmark): CID only. DTMF sent before first ring with no polarity reversal and no DTAS. • ETSI DTMF: CID only. DTMF sent after DTAS (and no polarity reversal) and before first ring. • ETSI DTMF With PR: CID only. DTMF sent after polarity reversal and DTAS and before first ring. • ETSI DTMF After Ring: CID only. DTMF sent after first ring (no polarity reversal or DTAS) • ETSI FSK: CID, CIDCW, and VMWI. FSK sent after DTAS (but no polarity reversal) and before first ring. Waits for ACK from a device after DTAS for CIDCW. • ETSI FSK With PR (UK): CID, CIDCW, and VMWI. FSK is sent after polarity reversal and DTAS and before first ring. Waits for ACK from a device after DTAS for CIDCW. Polarity reversal is applied only if equipment is on hook. • DTMF (Denmark) with PR: CID only. DTMF sent after polarity reversal (and no DTAS) and before first ring. Default setting: Bellcore(N.Amer, China) The choices are from 1 to 8. Default setting: 3 The ATA supports bell 202 and v.23 standards for caller ID generation. Default setting: bell 202 Cisco SPA100 Series Phone Adapters Administration Guide 89