Cisco SRW248G4P Administration Guide - Page 24
Managing System Logs, Setting System Log Settings - console
View all Cisco SRW248G4P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3 Managing System Logs This section describes the System Log feature, which enables the switch to generate several independent logs. Each log is a set of messages describing system events. The switch generates the following local logs: • Log sent to the console interface. • Log written into a cyclical list of logged events in the RAM and erased when the switch reboots. • Log written to a cyclical log-file saved to the Flash memory and persists across reboots. In addition, you can send messages to remote SYSLOG servers in the form of SYSLOG messages. This section covers the following sections: • Setting System Log Settings • Setting Remote Logging Settings • Viewing Memory Logs Setting System Log Settings You can enable or disable logging on the Log Settings page, and select whether to aggregate log messages. You can select the events by severity level. Each log message has a severity level marked with the first letter of the severity level concatenated with a dash (-) on each side (except for Emergency that is indicated by the letter F). For example, the log message "%INIT-I-InitCompleted: ... " has a severity level of I, meaning Informational. Cisco Small Business 200 Series Smart Switch Administration Guide 25