Cisco VG202 Hardware Installation Guide - Page 23
Interfaces and Service Capabilities, Interface Options - configuration interfaces
View all Cisco VG202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 1 Overview of the Cisco VG202 and Cisco VG204 Voice Gateways Interfaces and Service Capabilities Interfaces and Service Capabilities Table 1-3 describes the various physical ports and the services that each port type supports, including the following. • The Cisco VG202 and VG204 voice gateways provide a connection to the terminal or PC for software configuration or troubleshooting. The console port may be configured as a virtual auxiliary port for dial backup and remote management. • Two Fast Ethernet ports. • Two or four FXS ports. Table 1-3 Cisco VG202 and VG204 Voice Gateways Interfaces and Service Capabilities Port Interface Configurations Interface To Console/AUX EIA/TIA-232 asynchronous ASCII terminal or Port serial (DCE) personal computer Fast Ethernet 10/100BASE-T (802.3) Ports 0/0, 0/1 LAN Ports 0 to 2, or FXS (loop-start or 0 to 4 ground-start) Analog phone, fax, or modem Services Supported Local administrative access Data Analog voice/fax or modem Details RJ-45 physical interface RJ-45 physical interface 2-port FXS, on premises only 4-port FXS, on premises only Interface Options Table 1-4 lists the interface options that are available in the Cisco VG202 and Cisco VG204 voice gateways. Table 1-4 Interface Options for Cisco VG202 and Cisco VG204 Voice Gateways Voice Gateway RJ-111 RJ-452 FE3 Cisco VG202 voice 2 gateway Yes 2 Cisco VG204 voice 4 gateway Yes 2 1. Analog voice interface. 2. Analog voice interface. 3. 10/100BASE-T ports. 4. Foreign exchange station. FXS4 2 4 Cisco VG202 and Cisco VG204 Voice Gateway Deployment Figure 1-6 shows a typical deployment scenario for the Cisco VG202 and Cisco VG204 voice gateways. OL-15959-01 Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide 1-7