Cisco WRT600N User Manual - Page 22

Chapter 3 Advanced Configuration Group Account Group Account Screen To add a new group: 1. Enter a name for the new group. 2. Enter a description for the new group. 3. Select read and write or read only access. 4. Click Save Settings to save the new changes, or click Cancel Changes to cancel the changes. Click Close to close the screen. Each group you created on the Group Account screen will be listed with its access, which you can edit or delete. Select Edit to edit a user or Delete to delete the user. If you click Edit, the Group Account screen appears. Refer to the "Group Account Screen" section. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. For more information, click Help. Access Restrictions > Internet Access The Access Restrictions > Internet Access screen allows you to deny or allow specific kinds of Internet usage and traffic, such as Internet access, designated services, and websites during specific days and times. Dual-Band Wireless-N Gigabit Router with Storage Link Access Restrictions > Internet Access Internet Access Internet Access Policy Internet Access can be managed by a policy. Use the settings on this screen to establish an access policy (after Save Settings is clicked). Selecting a policy from the drop-down menu will display that policy's settings. To delete a policy, select that policy's number and click Delete. To view all the policies, click Summary. Deny or Allow If you select Deny, the PC on the Edit List will be denied Internet Access by the dates and times selected. PCs not on the list will still have Internet access. If you select Allow, the PCs on the Edit List will have Internet access by the dates and times selected. The PCs not on the Edit List will not have Internet access. If there is a conflict with a policy, the lower numbered policy will have priority over a higher numbered policy. To create an Internet Access Policy: 1. Select a number from the Internet Access Policy dropdown menu. 2. Enter a Policy Name in the field. 3. To enable this policy, select Enable. 4. Click Edit List of PCs to select which PCs will be affected by the policy. The List of PCs screen appears. You can select a PC by MAC Address or IP Address. You can also enter a range of IP Addresses if you want this policy to affect a group of PCs. After making your changes, click Save Settings to apply your changes or Cancel Changes to cancel your changes. Then click Close. 20