Cisco WS-C3560E-48TD-E-RF Installation Guide - Page 61
current-carrying conductors., VAC, 10A international is used on the phase conductors all
UPC - 882658132629
View all Cisco WS-C3560E-48TD-E-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 2 Installing and Starting Up the Switch Preparing for Installation Warning To prevent the switch from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 113°F (45°C). To prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings. Statement 17B Warning The device is designed to work with TN power systems. Statement 19 Warning When installing the unit, always make the ground connection first and disconnect it last. Statement 42 Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Statement 13 Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Statement 39 Warning Care must be given to connecting units to the supply circuit so that wiring is not overloaded. Statement 51 Warning Unplug the power cord before you work on a system that does not have an on/off switch. Statement 20 78-6456-04 Catalyst 3500 Series XL Hardware Installation Guide 2-3