Cisco WS-C3560E-48TD-E-RF Installation Guide - Page 79
Connecting to a 1000BaseX GBIC Module Port
UPC - 882658132629
View all Cisco WS-C3560E-48TD-E-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 2 Installing and Starting Up the Switch Connecting to the GBIC Module Ports Connecting to a 1000BaseX GBIC Module Port Caution Do not remove the rubber plugs from the fiber-optic port or the rubber caps from the fiber-optic cable until you are ready to connect the cable. The plugs and caps protect the fiber-optic port and cable from contamination and ambient light. Follow these steps to connect to the 1000BaseX port: Step 1 Step 2 Remove the rubber plugs from the fiber-optic port on the module, and store them for future use. Insert the SC connector in the fiber-optic receptacle, as shown in Figure 2-11. Figure 2-11 Connecting to a 1000BaseX Port 1 SYSTEM 2 RPS MODE STATUS UTIL DUPLX SPEED 22005 78-6456-04 Catalyst 3500 Series XL Hardware Installation Guide 2-21