Cisco WS-C3560X-48PF-S Hardware Installation Guide - Page 16
Network Module, Description, Installing a Network Module in the Switch
View all Cisco WS-C3560X-48PF-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Front Panel Description Chapter 1 Product Overview Table 1-3 Network Modules Network Module1 Description 10-Gigabit Ethernet This module has four slots. Two slots support only 1-Gigabit SFP modules, two C3KX-NM-10G slots support either 1-Gigabit SFP or 10-Gigabit SFP+ modules. The four slots are grouped as two pairs with each pair consisting of one SFP slot and one SFP+ slot. Each pair supports either two 1-Gigabit SFP modules or one 10-Gigabit SFP+ module. A 10-Gigabit SFP+ module cannot operate at the same time as the corresponding 1-Gigabit SFP module in the pair. Supported combinations of SFP and SFP+ modules: • Slots 1, 2, 3, and 4 populated with 1-Gigabit SFP modules. • Slots 1 and 2 populated with 1-Gigabit SFP modules and Slot 4 populated with one 10-Gigabit SFP+ module. • Slot 2 populated with one 10-Gigabit SFP+ module and Slots 3 and 4 populated with 1-Gigabit SFP modules. • Slot 2 and Slot 4 each populated with 10-Gigabit SFP+ modules. A 10-Gigabit SFP+ module takes precedence over a 1-Gigabit SFP module except when an SFP module is first inserted in Slot 1 and has link. When you insert an SFP+ module in Slot 2, the SFP in Slot 1 retains link. The SFP+ module in Slot 2 does not operate. When the SFP module in Slot 1 is shutdown, loses link, or is removed, the SFP+ module in Slot 2 becomes operational. At this point, the SFP module in Slot 1 will not become operational under any circumstance for as long as an SFP+ module remains in Slot 2 whether it is link up or not. The same precedence applies to Slots 3 and 4. 10-Gigabit Ethernet This module has two autonegotiating 10-Gigabit Ethernet (copper) ports. C3KX-NM-10GT 10-Gigabit Ethernet Service Module C3KX-SM-10G This module has two slots that support either 1-Gigabit SFP or 10-Gigabit SFP+ modules. The service module supports Net Flow and MACSec Uplink Encryption (switchto-switch encryption between uplinks). For information on configuring the service module, refer to the Configuring the Network Services Module note. 1-Gigabit Ethernet This module has four 1-Gigabit SFP module slots. Any combination of standard C3KX-NM-1G SFP modules are supported. SFP+ modules are not supported. If you insert an SFP+ module in the 1-Gigabit network module, the SFP+ module does not operate, and the switch logs an error message. Blank This module has no uplink ports. C3KX-NM_BLNK 1. All network modules are hot-swappable. For information about the network modules, see the "Installing a Network Module in the Switch" section on page 2-22. For cable specifications, see Appendix B, "Connector and Cable Specifications." Catalyst 3750-X and 3560-X Switch Hardware Installation Guide 1-6 OL-19593-02