Cisco WS-C3560X-48PF-S Hardware Installation Guide - Page 21
XPS LED, Port LEDs and Modes, Color, XPS Status, Mode LED, Port Mode, Description
![]() |
View all Cisco WS-C3560X-48PF-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 Product Overview Front Panel Description XPS LED Table 1-7 XPS LED Color Off Green Blinking green Amber Blinking amber XPS Status XPS cable is not installed. Switch is in StackPower mode (Catalyst 3750-X). XPS is connected and ready to provide back-up power. XPS is connected but is unavailable because it is providing power to another device (redundancy has been allocated to a neighboring device). The XPS is in standby mode or in a fault condition. See the XPS 2200 documentation for information about the standby mode and fault conditions. The power supply in a switch has failed, and the XPS is providing power to that switch (redundancy has been allocated to this device). For information about the XPS 2200, see the Cisco eXpandable Power System 2200 Hardware Installation Guide on Cisco.com. Port LEDs and Modes Each Ethernet port, 1-Gigabit Ethernet module slot, and 10-Gigabit Ethernet module slot has a port LED. These port LEDs, as a group or individually, display information about the switch and about the individual ports. The port mode determines the type of information shown by the port LEDs. Table 1-8 lists the mode LEDs and their associated port modes and meanings. To select or change a mode, press the Mode button until the desired mode is highlighted. When you change port modes, the meanings of the port LED colors also change. Table 1-9 explains how to interpret the port LED colors in different port modes. When you press the Mode button on any switch in the Catalyst 3750-X switch stack, all the stack switches change to show the same selected mode. For example, if you press the Mode button on the stack master to show the SPEED LED, all the other switches in the stack also show the SPEED LED. Table 1-8 Port Mode LEDs Mode LED Port Mode Description STAT Port status The port status. This is the default mode. SPEED Port speed The port operating speed: 10, 100, or 1000 Mb/s. DUPLX MAST1 STACK1 Port duplex mode Master Stack member status The port duplex mode: full duplex or half duplex. The stack master status. The stack member status. PoE+2 StackWise port status The StackWise port status. See the "Stack LED (Catalyst 3750-X)" section on page 1-14. PoE+ port power The PoE+ port status. 1. Only Catalyst 3750-X switches. 2. Only switches with PoE+ ports. OL-19593-02 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide 1-11
![](/manual_guide/products/cisco-wsc3560x48pfl-hardware-installation-guide-0cefc4c/21.png)