Clifford IntelliGuard 750 Owners Guide - Page 14

auxiliary channel bypass Alarm sensor input zones one, two, three, and eight will be bypassed while a pulsed or timed auxiliary Output is active. panic mode with smart door locking If you are threatened in or near your vehicle, you can attract attention by triggering the system with your remote! Just press for two seconds to enter Panic Mode. The siren will sound and the parking lights will flash for the programmed duration. If the ignition is on, the doors will lock; if the ignition is off, the doors will unlock. To stop Panic Mode at any time press on the remote again. disarm/valet® mode Entering your pin code using the PlainView 2 Valet® button allows you to disarm the system or enter valet® mode without using the remote. In valet® mode, the security system will not arm, even with the remote, but all convenience functions (door locks, trunk release, etc.) will continue to work normally. To disarm or enter Valet® Mode: 1. Turn the ignition on. 2. Enter PIN code (factory setting is 2). © 2004 directed electronics, inc. 11