Clifford IntelliGuard 750 Owners Guide - Page 25

different column begin at step 4 within 60 seconds.

Page 25 highlights

5. Feature select - Press the same number of times as the desired feature. The siren will chirp with each press. The feature can now be changed using the remote control. 6. Feature change - Press on the remote. If the system chirps once, the feature has just turned off; if the system chips twice, the feature has just turned on. If the feature has more than two settings, continue pressing on the remote to toggle through the settings. You can advance to any feature in the same column by pressing within 60 seconds; to program a feature in a different column begin at step 4 within 60 seconds. note: Refer to the Feature Descriptions sections of this guide for important notes and descriptions of the system features and programming. 7. Exit programming - To exit programming mode turn the ignition off or wait 60 seconds without pressing the PlainView 2 Valet® button. The siren will chirp three times to indicate programming mode has been exited. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

22
5.
Feature select - Press
the same number of times as the
desired feature. The siren will chirp with each press. The fea-
ture can now be changed using the remote control.
6.
Feature change - Press
on the remote. If the system
chirps once, the feature has just turned off; if the system
chips twice, the feature has just turned on. If the feature has
more than two settings, continue pressing
on the
remote to toggle through the settings.
You can advance to any feature in the same column by
pressing
within 60 seconds; to program a feature in a
different column begin at step 4 within 60 seconds.
7.
Exit programming - To exit programming mode turn the igni-
tion off or wait 60 seconds without pressing the PlainView 2
Valet
®
button. The siren will chirp three times to indicate pro-
gramming mode has been exited.
note:
Refer to the
Feature Descriptions
sections of this guide for impor-
tant notes and descriptions of the system features and programming.