Clifford IntelliGuard 750 Owners Guide - Page 33
pin programming
View all Clifford IntelliGuard 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
pin programming A PIN code can have one to four digits; each digit can be from 0-9. note: A PIN code cannot begin with a zero. Programming Procedure 1. Enter the feature location in the installer programming grid. 2. Immediately press and release of the PlainView 2 Valet button. 3. Select each digit by pressing 1-9 times, and then press to enter the number into the system. To enter a zero, press only. 4. Wait for two siren chirps after a five second pause or five seconds after the last digit has been entered if using less than four digit code number. 5. Turn off the ignition; the siren will chirp three times. 6. The programming mode is now exited. To program a PIN code of 1032: 1. Press and release hear one chirp. once and once. You will 3. Press and release once. You will not hear a chirp after programming a zero. 5. Press and release three times, and then press once. You will hear three chirps. 6. Press and release two times, and then press once. You will hear two chirps. 30