Clifford IntelliGuard 750 Owners Guide - Page 22
programming options
View all Clifford IntelliGuard 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
z Power Saver when the system is armed: After the system has been armed for 48 hours, the LED will flash at half its normal rate, decreasing the system's current draw. z Power Saver in Valet® Mode: When the system enters Valet® Mode the LED illuminates steadily. If the vehicle is not used (ignition is not turned on) for a period of one hour while the system is in Valet® Mode, the LED will shut off. If the system remains in Valet® Mode, the LED will come back on the next time the ignition is turned on and then back off. programming options Programming options control what your system does during normal operation, and require few or no additional parts. However, some may require additional installation labor. Following is a list of the program settings, with the factory settings in bold: z Active arming (only with the remote) or passive arming (automatic arming 30-seconds after the last door is closed). z Arming/disarming confirmation siren chirps on or off. z Auto-Lock on/off/rpm. ON: The doors will lock three seconds after the ignition is turned on unless a door is open. RPM: The doors will lock when the engine speed increases. z Auto-Unlock on/off: With this feature on, the doors will unlock when the ignition is turned off. z Passive door locking (with passive arming) or active door locking (only when arming with the remote). Passive locking © 2004 directed electronics, inc. 19