Clifford IntelliGuard 800 Owners Guide - Page 10
What each button/channel does
View all Clifford IntelliGuard 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
What each button/channel does Your IntelliGuard 800 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel (except 9 through 12) to any function (see pages 20-22). The following chart indicates what each remote control channel number does, and how to transmit each channel number. Factory settings of the 12 remote control channels Transmitting channel number: Causes the system to: Press the How Press LevelShift many button button? times? number 1 arm or disarm and lock or unlock the doors no - 1 pop the trunk* (if the system is disarmed) 2 AND no - 2 turn on the headlights* (if the system is armed) 3 silently arm or disarm no - 3 4 activate optional accessory function #1 no - 4 5 activate optional accessory function #2 yes once 1 6 activate optional accessory function #3 yes once 2 7 activate optional accessory function #4 yes once 3 8 activate optional accessory function #5 yes once 4 9 remotely enter or exit valet mode (see page 14) yes twice 1 10 turn off one or both sensor zones (see page 14) yes twice 2 11 remotely adjust and test sensitivity of the Proximity Sensor's passenger compartment zone (see page 14) yes twice 3 12 remotely adjust and test sensitivity of the Proximity Sensor's exterior warning zone (see page 14) yes twice 4 * May require additional wiring. TO ARM Press button 1 (channel 1) once. You will hear two chirps and the THE SYSTEM parking lights will flash twice. The dashboard LED will flash repeatedly and the car doors will automatically lock. TO DISARM THE SYSTEM Press button 1 (channel 1) again. One chirp and one flash of the parking lights will confirm disarming. In addition, the car doors will automatically unlock and the interior lights will turn on and stay on for 30 seconds or until you start the engine, whichever occurs first. TO ACTIVATE THE PANIC FEATURE Press button 1 for 3 seconds. The lights will flash repeatedly and the MultiSound Medallion Siren will blare for 30 or 60 seconds (user-selectable), or until you press button I again to turn it off. 9