Clifford IntelliGuard 800 Owners Guide - Page 19
Smart Trunk Release Capability, SmartPowerUp™ II, AutoLock/AutoUnLock™, High-output MultiSound
View all Clifford IntelliGuard 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Smart Trunk Release Capability Your IntelliGuard 800 has a built-in electronic interlock that automatically prevents accidental activation of the remote trunk release option. If you have this option, you'll note that the system must be disarmed and the ignition must be off in order for you to remotely pop the trunk with button 2 (channel 2). Transmitting channel 2 while the system is armed will optionally activate the headlights for any duration of your choosing between 1 second and 2.5 minutes (factory preset to 30 seconds). SmartPowerUp™ II If power to the system control unit is ever removed, SmartPowerUp II ensures that the system will automatically restore itself to its previous status when power is restored. So if a thief tampers with the vehicle battery in an attempt to steal your car, the system will automatically re-arm itself and immediately sound the siren. However, if your vehicle is to be serviced by a mechanic, just put the system in valet mode. If the mechanic needs to interrupt vehicle power, your system will automatically return to its valet mode state when power is restored; there will be no alarm activation and no need to provide your mechanic with your remote control and instructions on how to use it. AutoLock/AutoUnLock™ For your safety and that of your passengers, the system automatically locks the doors when you begin driving, and unlocks them when you turn off the ignition. If you prefer, you may turn off this feature. See the User-selectable features section on pages 20-22. High-output MultiSound Medallion™ Siren All the electronics for the siren are built into the IntelliGuard 800's control unit rather than the siren itself. This protects the circuitry from engine heat, dirt and exposure to the elements (in contrast, the electronics of other alarm companies' sirens are part of the siren itself and, therefore, far more susceptible to failure). In addition to greatly enhancing long-term reliability, your IntelliGuard 800 also provides these additional features: Personalized Siren Sounds: Most alarm sirens have a single "warble" tone. A few offer "six-tone" sirens that either cannot be adjusted or require the physical destruction of certain circuit wires in order to change the sounds (the change is permanent and cannot be changed again). Your IntelliGuard 800 MultiSound Medallion Siren circuitry is different. As shipped from the factory, the siren sounds six different alarm sound patterns. However, you may turn any of the six different alarm sound patterns on or off to create a different combination of sound patterns. In all, there are 64 different combinations you may select. You may set your own Personalized Siren Sounds so if you hear a siren at a distance, you will know for sure whether it is your car or someone else's. See User-selectable features on pages 20-22. QuietChirps™: You can control the volume of the normal arm and disarm chirps. As shipped from the factory, your system issues full-volume chirp acknowledgments. If you prefer, you may reduce the chirp volume to a level 18