Cobra Battery Charger 2A Battery Charger 2A Manual - Page 6
Your Charging Cables
![]() |
View all Cobra Battery Charger 2A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connecting Your Charging Cables Do not connect the battery charger into an AC outlet until all other connections have been made. Do not make any connections to the carburetor, fuel lines, or thin metal sheet parts. The instructions provided are for a negative ground system commonly found in most passenger vehicles. If your vehicle is a positive ground system, simply follow the instructions in reverse order. 1. Connect the positive (red) alligator clamp or O-ring terminal to the positive battery terminal 2. Connect the negative (black) alligator clamp or O-ring terminal to the negative battery terminal or vehicle chassis. 3. Connect the opposite end of your cable to the battery charger main cable. 4. Connect the battery charger into a suitable electrical outlet. Determine which connection type is needed (Alligator or O-ring) Connect either the alligator clamps or O-ring terminals to your battery. (First, red to positive, then black to negative). Alligator Clamps O-Ring Terminals Connect the opposite end of your cable to the battery charger main cable Plug the battery charger into a suitable electrical outlet 5
![](/manual_guide/products/cobra-battery-charger-2a-battery-charger-2a-manual-e1136dd/6.png)