Cobra CDR 895 D CDR 895 D Product Manual - Page 9
Basic Operation
View all Cobra CDR 895 D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
BASIC OPERATION POWERING ON THE DEVICE The device will power on automatically when plugged in and can also be powered on by PRESSING AND HOLDING the On/Off button until the display activates. THE MICRO SD MEMORY CARD The device comes with a pre-installed micro SD memory card. To remove the SD card, press firmly on the SD card to push it further into the slot. There will be a click and the SD card will pop out on release. Extract the card and replace as necessary by inserting a card into the slot and pressing until it locks in place. CONTINUOUS LOOP RECORDING: Once the memory card is full, the camera will continuously overwrite the oldest footage recorded. To protect a clip so that it will not be overwritten, press the Emergency Record Button. The emergency record icon will show on the screen. Files can also be locked from the playback menu in Video Playback Mode. EMERGENCY RECORDING An Emergency Recording is triggered when the Emergency Record Button at the top of the unit is pressed or when the G-Sensor registers an impact. Emergency Recordings create locked files that are not overwritten by Continuous Loop Recording. In order to ensure that important footage isn't lost surrounding an incident, adjacent video clips are locked if the incident happens within 30 seconds of the beginning or end of a clip. CHARGING THE DEVICE You can charge the device with the included car charger or with most USB ports. The battery in this unit is intended to operate the unit after power loss due to an accident or crash. Note that, while recording may continue, the device is not intended for long-term recording on battery power. NAVIGATING MENUS When in a menu, press or to navigate to the menu item you want to select or change and then press to select or change the option associated with that item. Pressing at any time will exit the menu without saving changes. VOLUME ADJUST Briefly press the Power/Volume button to enter the volume menu. There are 5 volume settings and mute (no Volume) 9|Page