Cobra DASH 2316D DASH Series Manual - Page 13

VIDEO SETTINGS Video Resolution: This setting allows you to set one of three available video recording resolutions: Higher resolutions will give you a sharper image, but take up more memory on the card. The available resolutions are: 1296P Super HD 2304x1296 30 Frames per Second 1080P Full HD 1920x1080 30 Frames per Second 720P HD 60fps 1280x720 60 Frames per Second 720P HD 30fps 1280x720 30 Frames per Second Dual View Models Only - For dual camera models, Video Resolution is broken down into Cam1 Resolution and Cam2 Resolution. Note that 720P 30fps is the only resolution option for Cam2. When in Dual Cam Mode, Cam1 is limited to 1080P Full HD. Loop Clip Time: This setting allows you to control the duration of each individual movie clip on the device. Movie clips can be set to durations of 3 minutes, 5 minutes, 10 minutes, or off. In general, 3minute clips are preferred because the file size is much more manageable when transferring to a computer for editing. G-Sensor: The Drive HD Dash Cam includes a built in G-Sensor which allows the device to determine when the car has been in a collision. If it detects a collision, it automatically locks the recording being made at the time of the accident. You can use this setting to set the sensitivity of the G-Sensor from 1-3 or turn it off. Level 1 is the easiest to activate the G-sensor and the G-Sensor may lock files due to smaller bumps like potholes and the SD card may fill up with protected files. Level 3 is the hardest to activate the G-sensor. 13 | P a g e