Cobra DASH 2316D DASH Series Manual - Page 7
Single Cam, Installation - dash cam manual
![]() |
View all Cobra DASH 2316D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
SINGLE CAM INSTALLATION 1 MOUNT To install the Adhesive Windshield Mount, slide the dash cam onto the mount and twist to tighten the cam in desired location. Find the spot on your windshield where you would like to mount the camera and confirm the placement. Reminder, this is an adhesive mount so it is important to mount correctly the first time. Next, peel the plastic film off the 3M adhesive and press the mount FIRMLY onto the windshield. 2 POWER Plug one end of the supplied 12V Vehicle Power Adapter into your vehicle's cigarette lighter, and the other end into the micro USB port. The unit will automatically turn on and start recording. To manually power on the device PRESS AND HOLD the Power button until the display activates. When the power button is used to power on the unit recording must be started manually. Note: A Hardwire Kit (CA-MicroUSB-001) is available at www.cobra.com for a more permanent installation that allows for discrete routing of the power cable. 3 DRIVE! Drive HD Dash Cams are designed to set and forget. After initial setup the unit will turn on and start recording as soon as power is applied. When the Micro SD Card is full the oldest footage will be deleted to make way for the new. If you witness something that you don't want to be deleted simply press the Emergency Record button and it will be saved forever. 7|Page
![](/manual_guide/products/cobra-dash-2316d-dash-series-manual-c5ab95c/7.png)