Cobra RAD 700i Main Product Image DriveSmarter App Carplay Update RAD 700i Man - Page 5

Installation Your new detector comes with our latest EZ Mag Mount™. Simply line up the detector's mounting area with the bottom of the EZ Mag Mount bracket and the magnet will connect. To remove the detector from the mount, simply pull the detector off of the mount. Mounting Tips: • Center of windshield between driver and passenger. • Ensure clear view of road ahead and sky above. • Avoid windshield wipers and heavily tinted areas. To Mount the Detector in Your Vehicle: 1 Remove backing from EZ Mag Mount. 2 Firmly press the EZ Mag Mount onto the windshield and flip the locking clamp to secure. 3 Tilt the display end of the detector slightly upward and engage with the mounting bracket. The EZ Mag Mount magnet holds the detector firmly in place. 4 To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb wheel to secure. 5 To remove the detector, simply lift the display end of the detector upward. The detector will detach from the mount. 6 To remove the mount from windshield, release the locking clamp and pull the tab on top of the EZ Mag Mount. EZ Mag Mount Care Instructions: To clean your EZ Mag Mount, simply rinse under warm water, gently wipe off any debris and allow to air dry. Installation 1 Attach Magnetic Mount to RAD 700i Flip Tab Down RAD 700i 3 Lock Mount 2 Mount Windshield 4 Connect and Power On 7 8