Coby KTFDVD1093 User Manual - Page 13

TV Function Time Setup ITEM Time Zone Daylight Saving Time DESCRIPTION Select the time zone. (Central, Mountain, Pacific, Alaska, Hawaii, Atlantic, Eastern). Set the time saving function on/off. Option Setup ITEM Menu Language Color Mode Zoom Mode Restore Default Channel Setup ITEM Antenna Auto Scan Show/Hide Favorite Channel No Channel Label DESCRIPTION Setup the menu language. Setup the color mode. (Normal, Warm, Cool) Adjust the display mode. (Normal, 4:3). Restore settings to the factory default. DESCRIPTION Setup the antenna type as Air or CATV. Search channels automatically. Press the right direction button to start searching, press EXIT to quit. Skip the unwanted channels. Press the up/down direction button to select the channel, press OK to set block. Press OK again to release. Make the favorite channels collection. Press the up/down direction button to select the channel, press OK to set it as the favorite channel. Press OK again to release. Edit the channel label. 1. Select "Channel No", press the left/right direction button to set the channel. 2. Select "Channel Label", press the right direction button to show the edit menu. In the menu, press the left/right direction button to move left/right, Press the up/down direction button to make changes. 3. To clear the label, repeatedly press the up/down direction button to display the blank input. .17 . ro e ootin Should your DVD player develop a problem, please check below before requesting service: Symptom No power Does not play No Picture Check and Action 1. Make sure the unit has been powered on manually. 2. Check if the power cord has been properly connected to the power outlet. 3. Make sure the battery pack is fully charged. 1. No disc, load a disc. 2. Disc has been loaded upside down. Place the disc with the label side up. 3. Disc's rating level is higher than the player's setting. 4. Disc is incorrect type for the player. 5. Disc is damaged or dirty. Clean the disc or try another one. 6. Moisture may be condensed inside the player. Remove the disc and leave the unit power on for one or two hours. 1. Check if the system connection is proper and secure. 2. Check if the connection cables are damaged. 3. Clean the disc. Picture noisy/ distorted 1. Disc is damaged or dirty. Clean the disc or try another one. 2. Reset the color system. No sound or sound output not complete Remote control does not work 1. Check if the player has been switched on and correctly set. 2. Check if the system connections are secured. 3. Press AUDIO button to select other audio tracks of the disc. 4. Check if the MUTE function of the TV or amplifier has been activated. 5. There will be no sound output during REVERSE PLAY/PAUSE/SLOW and SEARCH. 1. Make sure the unit is turned on. . 2. Remove the obstacles between the remote control and the player. 3. Point the remote control towards the remote sensor on the player. 4. Check if the batteries of the remote control have been loaded with correct polarities. 5. Replace the batteries of the remote control. Malfunction Should the player develop a malfunction, unplug the player for 30 minutes. After that, power on the player and the restore function should reset the player. .18 .