Coby KTFDVD1093 User Manual - Page 7
Mounting Base - mounting template
UPC - 716829931097
View all Coby KTFDVD1093 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Mounting Under-Cabinet Mounting > > > > < < Min. 2.0 mm Max. 25.0 mm Mounting Base Choose an appropriate mounting location underneath a cabinet or shelf. Choose an appropritate mounting location underneath a cabinet or shelf. Close proximity to an electrical outlet, a TV antenna or cable connection and a telephone jack will facilitate a neat, easy installation. Do not mount the product above a range or oven. Be sure that the location chosen will provide adequate access to the electrical connection on the rear of the unit before continuing. Under-cabinet Mounting 1. Upon opening the final package, you will find a position reference template that tells the standard position you have to drive through when mounting. Tape the template in place onto the cabinet surface and drill four screw-holes accordingly through the cabinet base. 2. Position the product and mount it in place using the supplied screws. Do not over tighten. 3. Connect the cables. Route the wires safely away from the heat and moisture sources and secure them in place. NOTE: 1. The template is just for the position reference when mounting, please don't affix it to the mounting surface. 2. To ensure the product safety, it is recommended that the minimum thickness of your cabinet base should be 2.0 mm and the maximum thinckness should be 25.0 mm. 3. Take care when installing it. It may cause damage or serious injury should it fall from its mountings. .7.