Compaq Evo n1020v Compaq Evo Notebook N1020v Series, N1000v Series and Compaq - Page 125
Connector Cover
View all Compaq Evo n1020v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal and Replacement Procedures 5.8 Connector Cover ✎ The connector cover is available with carbon finish for Evo Notebook N1020v and N1000v models and silver finish for Presario 1500 models, and are included in the Miscellaneous Plastics/Hardware Kit, spare part number 285541-001. 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up with the rear panel facing forward. 3. Remove the two TM2.5 × 5.0 screws 1 that secure the connector cover to the base enclosure (Figure 5-15). 4. Open the connector cover 2. 5. Remove the connector cover from the base enclosure 3. Figure 5-15. Removing the Connector Cover Reverse the preceding procedures to install the connector cover. Maintenance and Service Guide 5-19