Compaq Evo n1020v Compaq Evo Notebook N1020v Series, N1000v Series and Compaq - Page 158
Removing the Top Cover and Microphone, Remove the microphone
View all Compaq Evo n1020v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Removal and Replacement Procedures 4. Turn the base enclosure top side up with the front facing forward. 5. Remove the three TM2.5 × 5.0 screws 1 that secure the top cover to the base enclosure (Figure 5-40). 6. Lift the top cover straight up 2 approximately one inch, then slide it forward 3 until the microphone cable 4 is exposed. 7. Disconnect the microphone cable 5 from the system board. 8. Remove the microphone 6 from the top cover. 9. Remove the top cover from the base enclosure. Figure 5-40. Removing the Top Cover and Microphone ✎ The microphone is included in the Miscellaneous Cable Kit, spare part number 285540-001. 5-52 Maintenance and Service Guide
5–52
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the base enclosure top side up with the front facing
forward.
5. Remove the three TM2.5 × 5.0 screws
1
that secure the top
cover to the base enclosure (Figure 5-40).
6. Lift the top cover straight up
2
approximately one inch, then
slide it forward
3
until the microphone cable
4
is exposed.
7. Disconnect the microphone cable
5
from the system board.
8. Remove the microphone
6
from the top cover.
9. Remove the top cover from the base enclosure.
Figure 5-40. Removing the Top Cover and Microphone
✎
The microphone is included in the Miscellaneous Cable Kit,
spare part number 285540-001.