Compaq Presario 1200 Presario 1245 Series Maintenance and Service Guide - Page 40
ensure that the, cable is fully
View all Compaq Presario 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Maintenance & Service Guide Presario 1200 Series Model: 1245 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations 4. Turn the computer over (right side up), pull forward on the display latches to release and open the display assembly. 5. Lift up front end of the palmrest cover with touch pad and remove it from the groove in the chassis. 6. Tilt the palmrest cover with touch pad, allowing it to rest on top of the keyboard, and disconnect the flex cable from the ZIF connector on the palmrest cover. CAUTION: When replacing the palmrest cover with touch pad, ensure that the cable is fully inserted into the ZIF connector on the system board. If the metal end comes in contact with the keyboard, damage may occur to the computer. To replace the palmrest cover with touch pad, reverse the previous procedures. When replacing the palmrest cover, ensure NOTE: that the properly cable is routed through the slot on the Upper CPU cover. Return to Removal & Replacement Procedures