Compaq Presario 2100 Maintenance and Service Guide - Page 36
Removing an SDRAM Module, Reassembly Notes
View all Compaq Presario 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
NOTE: The SDRAM door on HP Pavilion ze5x00, HP Compaq nx9010 and nx9008, and Compaq Presario 2500 models is located in the rear left corner of the notebook bottom, as indicated in Figure 2-4. The procedure for removing the SDRAM door and modules is the same for all notebook models. Figure 2-4. Removing an SDRAM Module HP Pavilion ze5x00, HP Compaq nx9010, nx9008, and Compaq Presario 2500 Models Reassembly Notes Carefully press the SDRAM module into the connector at an angle of about 30°, until it is fully inserted, and then press down on both sides of the SDRAM module until the latches snap closed. 2-6 Removal and Replacement Service Manual
2-6
Removal and Replacement
Service Manual
NOTE:
The SDRAM door on HP Pavilion ze5x00, HP Compaq nx9010 and nx9008, and
Compaq Presario 2500 models is located in the rear left corner of the notebook bottom, as
indicated in Figure 2-4. The procedure for removing the SDRAM door and modules is the
same for all notebook models.
Figure 2-4. Removing an SDRAM Module
HP Pavilion ze5x00, HP Compaq nx9010, nx9008,
and Compaq Presario 2500 Models
Reassembly Notes
Carefully press the SDRAM module into the connector at an angle of about 30°, until it is fully
inserted, and then press down on both sides of the SDRAM module until the latches snap closed.