Compaq Presario 2100 Maintenance and Service Guide - Page 82
CAUTION, Wireless Models, Removing the Hard Disk Drive Guide - antennas install
View all Compaq Presario 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
CAUTION: Wireless Models Be careful when removing and attaching antenna cables. Damage to cables or connectors can degrade performance. 3. Wireless models only: Remove the Mini PCI door, and then unplug the 2 antenna cables from the Mini PCI card. Do not remove the Mini PCI card at this time. 4. Remove the two M2.0×4.0mm screws that secure the PCMCIA assembly to the bottom case. 5. Remove the 4 screws that secure the hard disk drive guide to the bottom case. NOTE: The 4 screws that secure the hard disk drive guide are 2 different sizes. The screw in the upper left corner is a M2.5×6.0mm screw. The remaining 3 screws are M2.0×4.0mm screws. Make sure these screws are installed in the correct locations when reinstalling the hard disk drive guide. 6. Remove the hard disk drive guide. Figure 2-35. Removing the Hard Disk Drive Guide 2-52 Removal and Replacement Service Manual