Compaq Presario 2100 Maintenance and Service Guide - Page 70
Removing the Heat Sink with Fan, CAUTION, Reassembly Notes, Removal and Replacement
![]() |
View all Compaq Presario 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3. Disconnect the 2 fan cables from the motherboard. 4. Remove the 4 retaining M2.0×5.0mm screws in the "1," "2," "3," "4" sequence stamped on the heat sink. 5. Lift up on the heat sink (with fan). Figure 2-27. Removing the Heat Sink (with Fan) HP Pavilion 5x00, HP Compaq nx9010 and nx9008, and Compaq Presario 2500 Models CAUTION: Do not spin the fan blades with your finger or you could damage the fan's bearings. Reassembly Notes • If the thermal pad is damaged, use a sharp knife or scraper to carefully remove it from the heat sink, and then attach a new thermal pad. • Install the heat sink screws in this order: 1. Install all 4 screws lightly. 2. Fully tighten the screws in the order stamped on the heat sink. 2-40 Removal and Replacement Service Manual
![](/manual_guide/products/compaq-presario-1100-maintenance-service-guide-46b596f/70.png)