Compaq Presario 2100 Maintenance and Service Guide - Page 65
Removing the Audio PCA
View all Compaq Presario 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removing the Audio PCA (Service Partners Only) NOTE: The following audio PCA removal instructions apply only to HP Pavilion 5300 and 5200, HP Compaq nx9010, and Compaq Presario 2500 models. Required Equipment 1 Phillips screwdriver Removal Procedure 1. Unplug the AC adapter, if present, and then remove the battery. 2. Remove these additional assemblies: • Hard disk drive (page 2-9) • Keyboard cover (page 2-13) • Keyboard (page 2-16) • Switchboard PCA (page 2-19) • Display assembly (page 2-23) • Top case (page 2-26) 3. Disconnect the audio PCA cable from the motherboard. 4. Remove the audio PCA cable from the clip on the bottom case. 5. Remove the two M2.0×3.0mm flathead screws that secure the audio PCA shield to the bottom case. 6. Remove the audio PCA shield. Service Manual Removal and Replacement 2-35