Compaq Presario CQ57-300 Maintenance and Service Guide - Page 64

USB board, to which the USB board cable is connected, and then disconnect

Get Compaq Presario CQ57-300 PDF manuals and user guides View all Compaq Presario CQ57-300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

USB board Description USB board (includes cable) Spare part number 646128-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36), and then remove the following components: ● Optical drive (see Optical drive (select models only) on page 37) ● Keyboard (see Keyboard on page 46) ● Top cover (see Top cover on page 49) Remove the USB board: 1. Release the ZIF connector (1) to which the USB board cable is connected, and then disconnect the USB board cable (2) from the system board. 2. Remove the Phillips PM2.5×6.0 screw (2) that secures the USB board to the base enclosure. 3. Remove the USB board (3) and cable. Reverse this procedure to install the USB board. 56 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
USB board
Description
Spare part number
USB board (includes cable)
646128-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
36
), and then remove the following components:
●
Optical drive (see
Optical drive (select models only)
on page
37
)
●
Keyboard (see
Keyboard
on page
46
)
●
Top cover (see
Top cover
on page
49
)
Remove the USB board:
1.
Release the ZIF connector
(1)
to which the USB board cable is connected, and then disconnect the
USB board cable
(2)
from the system board.
2.
Remove the Phillips PM2.5×6.0 screw
(2)
that secures the USB board to the base enclosure.
3.
Remove the USB board
(3)
and cable.
Reverse this procedure to install the USB board.
56
Chapter 4
Removal and replacement procedures