Compaq Presario CQ57-300 Maintenance and Service Guide - Page 70

Remove the display bezel, of the display bezel until the bezel disengages from the display enclosure.

Get Compaq Presario CQ57-300 PDF manuals and user guides View all Compaq Presario CQ57-300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

4. Remove the display assembly (4). 5. If it is necessary to replace the display bezel or any of the display assembly subcomponents: a. Remove the two Mylar screw covers (1) and the two Phillips PM2.5×4.0 screws (2) that secure the display bezel to the display assembly. The Mylar screw covers are available in the Display Screw Kit, spare part number 646134-001. b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. c. Remove the display bezel (4). The display bezel is available using the following spare part numbers: ● 646117-001 - For use with computer models equipped with a webcam and a microphone ● 646118-001 - For use with computer models equipped only with a microphone 62 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
4.
Remove the display assembly
(4)
.
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the two Mylar screw covers
(1)
and the two Phillips PM2.5×4.0 screws
(2)
that
secure the display bezel to the display assembly. The Mylar screw covers are available in the
Display Screw Kit, spare part number 646134-001.
b.
Flex the inside edges of the top edge
(1)
, the left and right sides
(2)
, and the
bottom edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel
(4)
. The display bezel is available using the following
spare part numbers:
●
646117-001 — For use with computer models equipped with a webcam and
a microphone
●
646118-001 — For use with computer models equipped only with a microphone
62
Chapter 4
Removal and replacement procedures