Compaq Presario SR1000 Getting Started Guide - Page 26
Configuring sound for recording with the Realtek HD Sound Effect Manager (6-connector
View all Compaq Presario SR1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Configuring sound for recording with the Realtek HD Sound Effect Manager (6-connector, Multi-streaming Audio) The microphone connector on the front of the 6-connector audio PC is ready to use for recording sound. If you want to use another connector for recording, such as the Digital Audio In connector, use these steps to select it. NOTE: The pink and green connectors on the front of a PC with 6-connector sound can be retasked to perform other audio functions; refer to "Retasking audio connectors using the Audio Wizard (6-connector)" on page 18. 1 Click Start on the taskbar; Control Panel; Sounds, Speech, and Audio Devices; and Realtek HD Sound Effect Manager. 2 Click the Mixer tab. 3 In Record click the drop-down list. Choose: • RealTek HD Digital Input to use the digital audio in connector (select models only). • Line in/Mic in to use the Audio Line In (In) or the Microphone (Mic) connectors. 4 Click OK to close the window. Retasking audio connectors with the Realtek HD Sound Effect Manager (6-connector, Multi-streaming Audio) The pink and green connectors on the front of the PC connectors can be retasked as needed. 1 Click Start on the taskbar; Control Panel; Sounds, Speech, Devices; and Realtek HD Sound Effect Manager. 2 Click the Audio I/O tab. 3 Click the tool icon in the Front Panel section. The connector settings window displays. 4 Select Enable Jack detection when device is plugged in, and click OK. The front pink and green connectors can now be used as input or output devices. Configuring Multi-streaming Audio (6 connector, Multi-streaming Audio) The Realtek HD Sound Effect Manager software allows you to listen to two different audio sources on two different speaker sets. 20 Getting Started Guide