Compaq ProLiant 1850R ProLiant Server Troubleshooting Guide - Page 254
ADU Error Messages, HP Servers Troubleshooting Guide, Check the Disable Code field.
View all Compaq ProLiant 1850R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
ADU Error Messages Table D-1: Array Diagnostic Utility (ADU) Error Messages continued Message Description Recommended Action Accelerator status: Obsolete data was discarded During reset initialization, obsolete data was found in the cache, and was discarded (not written to the drives). Normal operations should continue. Accelerator status: Obsolete data was flushed (written) to drives During reset initialization, obsolete data was found in the cache. The obsolete data was written to the drives, but newer data may have been overwritten. If newer data was overwritten, you may need to restore newer data; otherwise, normal operation should continue. Accelerator status: Permanently disabled Array accelerator board has been permanently disabled. It will remain disabled until it is reinitialized using the Array Configuration Utility (ACU). Check the Disable Code field. Run ACU to reinitialize the array accelerator board. Accelerator status: Possible data loss in cache Possible data loss was detected during power-up due to all batteries being below sufficient voltage level and no presence of the identification signatures on the array accelerator board. There is no way to determine if dirty or bad data was in the cache and is now lost. Accelerator status: Temporarily disabled Array accelerator board has been temporarily disabled. Check the Disable Code field. Accelerator status: Unrecognized status A status returned from the array accelerator board that ADU does not recognize. Obtain the latest version of ADU. Accelerator status: Valid data found at reset Valid data was found in posted-write memory at reinitialization. Data will be flushed to disk. There is no error or data loss condition. No action is necessary. Accelerator status: Warranty alert Catastrophic problem with array accelerator board. Refer to other messages on Diagnostics screen for exact meaning of this message. Replace the array accelerator board. continued D-4 HP Servers Troubleshooting Guide