Compaq ProLiant 8500 Compaq Parallel Database Cluster Model PDC/O2000 for Orac - Page 45
Cabling the Fibre Host Adapters to the Storage Hubs or Switches
![]() |
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Cluster Architecture 2-21 I In each RA4000/RA4100 Array, the bottom (rack model) or left rear (tower model) array controller is always the standby controller. I The odd-numbered Fibre Channel SAN Switch (Fibre Channel SAN Switch #1) is connected to the active array controller in each RA4000/RA4100 Array. I The even-numbered Fibre Channel SAN Switch (Fibre Channel SAN Switch #2) is connected to the standby array controller in each RA4000/RA4100 Array. NOTE: The following active/standby configurations are examples only. You are not required to follow these configurations. For more information about installing active/standby configurations, refer to the following sections in Chapter 5, "Installation and Configuration": I "Cabling the Fibre Host Adapters to the Storage Hubs or Switches" I "Cabling the Storage Hubs or Switches to the RA4000 Array Controllers" In Figures 2-6 through 2-10, active I/O path components have been shaded to distinguish them from standby (inactive) components. Black Fibre Channel cables identify connections between active components; gray cables identify connections between standby components.
![](/manual_guide/products/compaq-112726001-compaq-parallel-database-cluster-model-pdco2000-oracle8i-windows-2000-administrator-guide-2c4ee07/45.png)