Compaq ProSignia 500 SMART-2DH Array Controller Reference Guide - Page 44
System Partition, SmartStart and Support Software CD, Array Configuration Utility Diskettes, NetWare
View all Compaq ProSignia 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5-3 NetWare The Compaq Array Configuration Utility for NetWare (CPQONLIN.NLM), is available on the NetWare Programs from Compaq (NPFC) diskettes in the \DRV_ARRY directory. Generate the NPFC diskettes using the Diskette Builder feature in SmartStart. The NPFC diskettes have an ARRAY.RDM readme file to access instructions on loading and using CPQONLIN.NLM. System Partition If SmartStart has been run on the server before, the Array Configuration Utility program should already be installed on the system partition. 1. Power off, then power on the server. 2. When the cursor is in the upper-right hand corner of the screen, press 10. 3. Navigate through the menus to the Array Configuration Utility program. SmartStart and Support Software CD You can run the Array Configuration Utility directly from the SmartStart and Support Software CD. 1. Insert the SmartStart and Support Software CD in the CD drive and power up the server. A menu is displayed. 2. Select Configure Hardware from the menu, then select the Array Configuration Utility. 3. After completing the configuration, remove the CD and restart the server. Array Configuration Utility Diskettes You can run the Array Configuration Utility from diskettes made using the Diskette Builder feature on the SmartStart and Support Software CD. 1. Boot the server from the Compaq SmartStart and Support Software CD. SMART-2DH Array Controller Reference Guide Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: F-CH05.DOC Last Saved On: 2/27/98 11:38 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED