Compaq d530 HP Compaq Business Desktop d500 Service Reference Guide, 5th Editi - Page 98
System Board, Preparation for Disassembly, Computer Access Panel, Expansion Cards
View all Compaq d530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Removal and Replacement Procedures- Convertible Minitower (CMT) Chassis 6.14 System Board 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the computer access panel (Section 6.5, "Computer Access Panel"). 3. Remove all PCI expansion boards (Section 6.9, "Expansion Cards"). 4. Remove the AGP graphics card (Section 6.9, "Expansion Cards"). 5. Disconnect all cables connected to the system board, noting their location for reinstallation. 6. Compress the system board tray handle 1 to release the latch and slide the system board tray towards the front of the computer 2 to free it from the back of the chassis. To install the system board with its tray, press down on the board to ensure its latching 1 and then, push the board into its locked position 2. 6-26 336492-005 Service Reference Guide, d500