Compaq dc7900 vPro Setup and Configuration for the dc7900p Business PC with In - Page 21
Default Setting = Disabled, Recommended Setting = User Dependent
View all Compaq dc7900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
17. Skip Un-Provision. This option returns the system to factory defaults. See the Return to Default section for more information about unprovisioning. 18. Skip VLAN. Default Setting = Disabled, Recommended Setting = User Dependent This option enables or disables VLAN support. If VLAN is enabled, then the VLAN tag must be provided (1-4094). 19. Select SOL/IDE-R, and then select Y. a. A message window indicates that the system resets after configuration. b. Select Username and Password, and then select Enabled. Default Setting = Enabled, Recommended Setting = Enabled This option allows you to add users and passwords from the WebGUI. If the option is disabled, then only the administrator has MEBx remote access. c. Select Serial Over LAN, and then select Enabled. Default Setting = Enabled, Recommended Setting = Enabled d. Select IDE Redirection, and then select Enabled. Default Setting = Enabled, Recommended Setting = Enabled 20. Select Password Policy. Default Setting = Default Password Only, Recommended Setting = Default Password Only This option determines if the local MEBx password can be modified from a remote console. Option Effect Default Password Only During Setup and Configuration Anytime This option will allow the MEBx password to be remotely modified only if it is the default "admin" password. This option will allow the MEBx password to be remotely modified only during Setup and Configuration of the AMT platform. This option will allow the MEBx password to be remotely modified at any time. 21. Select Remote Firmware Update, and then select Enabled. Default Setting = Enabled, Recommended Setting = Enabled This option enables or disables the ability to remotely update the ME firmware. 22. Skip Set PRTC. Default Setting = None, Recommended Setting = Current Date and Time This option sets the PRTC (Protected Real Time Clock). It is used with TLS mutual authentication, which checks for the client certificate for expiration based on its PRTC. PRTC has a valid date range of 1/1/ 2004 to 1/4/2021. 23. Select Idle Timeout. Default Setting = 1, Recommended Setting = 1 21