Compaq dc7900 vPro Setup and Configuration for the dc7900p Business PC with In - Page 33
HP Out of Band Manager and ISVs such as Altiris provide Setup and Configuration Servers. Check
View all Compaq dc7900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Q: Why does a new password set with the WebGUI cannot be used locally in the MEBx? A: A password set with the WebGUI is a remote password and will only work when accessing the MEBx remotely. It does not work with the MEBx locally. The local password must be used to locally access the MEBx. Q: Is TLS required? A: No. TLS is optional. Q: If TLS is not used, then what is used? A: HTTP Digest will be used for mutual authentication if TLS is not used. Q: Who provides Setup and Configuration Servers? A: HP Out of Band Manager and ISVs such as Altiris provide Setup and Configuration Servers. Check with your management console supplier to see if they offer this service. Q: Can AMT be set for static address and the OS set for DHCP or vice versa? A: No. Although it can be done, this is not a supported setting by Intel and may cause unexpected system behavior. Q: What is the default port used by the Intel WebGUI? A: The Intel WebGUI listens to port 16992. Q: What is the difference between the ME and AMT? A: The ME is the controller that manages AMT along with ASF and QST. Notice that clearing AMT settings does not affect ME settings since the ME is a separate entity. Q: Why does Wake-On-ME not work after the Idle Timeout is set? A: The Wake-On-ME feature only works if the ME ON in Host Sleep State setting is set to allow ME WoL and the system is fully provisioned. Q: Is a graphical representation of the ME and AMT available? A: Yes. 33