Compaq nc8230 HP Compaq nc8230, nx8220 and nw8240 Notebook PC - Maintenance an - Page 127
Remove the LED board, Reverse the above procedure to install the switch cover
View all Compaq nc8230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Removal and Replacement Procedures ✎ If necessary, perform the following steps to remove the LED board from the switch cover. 11. Turn the switch cover upside down. 12. Remove the six PM1.5×3.0 screws 1 that secure the LED board to the switch cover. 13. Remove the LED board 2. Removing the LED Board Reverse the above procedure to install the switch cover and LED board. Maintenance and Service Guide 6-25
Removal and Replacement Procedures
Maintenance and Service Guide
6–25
✎
If necessary, perform the following steps to remove the LED
board from the switch cover.
11. Turn the switch cover upside down.
12. Remove the six PM1.5×3.0 screws
1
that secure the
LED board to the switch cover.
13. Remove the LED board
2
.
Removing the LED Board
Reverse the above procedure to install the switch cover and
LED board.