Compaq nc8230 HP Compaq nc8230, nx8220 and nw8240 Notebook PC - Maintenance an - Page 145
Remove the wireless antenna cables from the top cover, through which they are routed.
View all Compaq nc8230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Removal and Replacement Procedures ✎ Make note of which antenna cable is attached to which antenna clip on the Mini PCI communications module before disconnecting the cables. 2. Disconnect the wireless antenna cables 1 from the Mini PCI communications module. 3. Remove the wireless antenna cables from the top cover clips 2 and 3 through which they are routed. 4. Disconnect the display cable 4 from the system board. Disconnecting the Wireless Antenna and Display Cables Maintenance and Service Guide 6-43
Removal and Replacement Procedures
Maintenance and Service Guide
6–43
✎
Make note of which antenna cable is attached to which antenna
clip on the Mini PCI communications module before
disconnecting the cables.
2. Disconnect the wireless antenna cables
1
from the Mini PCI
communications module.
3. Remove the wireless antenna cables from the top cover
clips
2
and
3
through which they are routed.
4. Disconnect the display cable
4
from the system board.
Disconnecting the Wireless Antenna and Display Cables