Compaq nc8230 HP Compaq nc8230, nx8220 and nw8240 Notebook PC - Maintenance an - Page 130
that secure the, thermal plate to the computer.
View all Compaq nc8230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Removal and Replacement Procedures 3. Disconnect the fan cable 1 from the system board. ✎ The following screws should be loosened and removed, then installed, in the 1, 2, 3, 4, 5, 6, 7, 8 sequence stamped on the thermal plate. 4. Loosen the four PM2.0×10.0 spring-loaded screws 2 that secure the thermal plate to the computer. 5. Remove the four T8M2.0×4.0 screws 3 that secure the thermal plate to the computer. 6. Remove the thermal plate 4. Removing the Thermal Plate Reverse the above procedure to install the thermal plate. 6-28 Maintenance and Service Guide
6–28
Maintenance and Service Guide
Removal and Replacement Procedures
3. Disconnect the fan cable
1
from the system board.
✎
The following screws should be loosened and removed, then
installed, in the 1, 2, 3, 4, 5, 6, 7, 8 sequence stamped on the
thermal plate.
4. Loosen the four PM2.0×10.0 spring-loaded screws
2
that
secure the thermal plate to the computer.
5. Remove the four T8M2.0×4.0 screws
3
that secure the
thermal plate to the computer.
6. Remove the thermal plate
4
.
Removing the Thermal Plate
Reverse the above procedure to install the thermal plate.