Compaq nc8230 HP Compaq nc8230, nx8220 and nw8240 Notebook PC - Maintenance an - Page 135
on the processor should be aligned in the, rear right corner when you install the processor.
View all Compaq nc8230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Removal and Replacement Procedures 5. Use a flat-blade screwdriver to turn the processor locking screw 1 one-quarter turn counterclockwise until you hear a click. 6. Lift the processor 2 straight up and remove it . ✎ The gold triangle 3 on the processor should be aligned in the rear right corner when you install the processor. Removing the Processor Reverse the above procedure to install the processor. Maintenance and Service Guide 6-33
Removal and Replacement Procedures
Maintenance and Service Guide
6–33
5. Use a flat-blade screwdriver to turn the processor locking
screw
1
one-quarter turn counterclockwise until you hear
a click.
6. Lift the processor
2
straight up and remove it .
✎
The gold triangle
3
on the processor should be aligned in the
rear right corner when you install the processor.
Removing the Processor
Reverse the above procedure to install the processor.