Compaq nx6110 HP Compaq nx6110, nc6110, nx6120 and nc6120 Notebook PCs - Maint - Page 121
the card away from the socket at a 45-degree angle., by pulling
View all Compaq nx6110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Removal and Replacement Procedures 4. Disconnect the auxiliary and main antenna cables 1 from the Mini PCI communications module. ✎ Make note of which antenna cable is attached to which antenna clip on the Mini PCI communications module before disconnecting the cables. 5. Spread the two retaining tabs 2 on each side of the Mini PCI socket to release the Mini PCI communications module. (The edge of the module opposite the socket rises away from the computer.) 6. Remove the Mini PCI communications module 3 by pulling the card away from the socket at a 45-degree angle. ✎ Mini PCI communications modules are designed with notches 4 to prevent incorrect installation. Removing a Mini PCI Communications Module Reverse the above procedure to install a Mini PCI communications module. Maintenance and Service Guide 6-15