Craftsman 27673 Operation Manual - Page 14
Dustbox
View all Craftsman 27673 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
DUSTBOX/ DUST COLLECTION /_, WARNING: Collected sanding dust from sandJingsurface coatings (polyurethane, linseed oil, etc.) can self-ignite in sander dust box or elsewhere and cause fire. To reduce risk, empty dust box frequently and strictly follow sander manual and coating manufacturer's instructions. /_ WARNING: When working on metal surfaces, DO NOT use the dust box or a vacuum cleaner because sparks are generated. Wear safety glasses and a dust mask. Due to the danger of fire, do not use your sander to sand magnesium surfaces. Do not use for wet sanding. CYCLONIC DUST/AIR SEPARATOR (CDS) COLLECTmON SYSTEM Dust Box features advanced air flow design with centrifugal force dust extraction that separates the dust particles from the air flow as they enter the box. The clean air then flows out of the box while the dust particles are trapped inside. This system provides more efficient dust collection than the standard dust bag system. TO REMOVE AND EMPTY DUST BOX (See Fig. 4) 1. Unplug the sander. I I c/a_usWingARpNosINsiGb:le sFeraiioluurse tpoerusnopnlaulginthjuerys. ander could result in accidental starting I 2. Locate two tab connectors on either side of cyclonic dust box and squeeze together. This disconnects dust box from sander. 3. Slide dust box off sander dust exhaust. 4. Cyclonic Dust box has black button on rear that pusl_es in to open a small door in rear of box (see Fig. 4a). Dust can be emptied from this door. Shake box aggressively to completely empty. To close door, simply push in until it clicks shut. two tab connectors on sides catch F'_. on to sander. You will hear them click. 6. Your sander is now ready to use. 5. To reattach dust box, push box until __,___. __ h Door ,on rear of Cyclonic Dust Box --'- 14