Craftsman 27673 Operation Manual - Page 5

tools with sharp - tool boxes

Get Craftsman 27673 - Professional 5 in. 3.0 Amp Random Orbit Sander PDF manuals and user guides View all Craftsman 27673 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

TOOL USE AND CARE SAFETY /_ WARNING: BE SURE to read and understand all instructions before operating this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. 1. ALWAYS use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. 2. DO NOT force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 3. DO NOT use the tool if switch does not turn it "On" or "Off". Any tool that cannot be controlled with the switch is dangerous and must be repaired. 4. DISCONNECT the plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safety measures reduce the risk of starting the tool ac('identally. 5. STORE idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 6. MAINTAIN tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control. 7. Keep sandpaper clean, remove excess build-up of dust and debris. Replace sandpaper when worn, this will provide better sanding results. 8. CHECK for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 9. USE ONLY accessories that are recommended for this tool. Accessories that may be suitable for one tool may become hazardous when used on another tool. I h/_azaWrdA, ReNspINecGia:lly Ewmhpetny rdeusisnt bcoagatibnegfoorre lisntsoeraegde otiol fhineilsphepsrevheanvte pboesesnibsleanfdireed. ELECTRICAL SAFETY the terminals of plug when installing or removing I th_e WpluAgRNfroINmGt:he oDuotlento. t permit fingers to touch 1. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Cover of @ @ Grounded ® Outlet Box ------- 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
TOOL
USE
AND
CARE
SAFETY
/_
WARNING:
BE SURE to read and understand
all instructions
before
operating
this power tool. Failure to follow all instructions
listed below may
result in electric shock, fire and/or serious
personal injury.
1. ALWAYS use clamps or other practical ways to
secure
and support
the
workpiece to a stable platform. Holding the work by hand or against your body
is unstable and
may
lead to loss of
control.
2. DO NOT
force
the tool. Use the correct tool for your application.
The correct tool
will do the job better and safer at the rate for which it
is
designed.
3. DO NOT use the tool if switch does not turn it
"On"
or
"Off".
Any tool that
cannot be controlled with the switch is dangerous and must be repaired.
4. DISCONNECT
the plug from the power source before making any
adjustments,
changing accessories
or storing the
tool.
Such preventive
safety measures reduce the risk of starting the tool
ac('identally.
5. STORE idle tools out of the reach of children and other untrained
persons.
Tools
are dangerous
in
the hands
of
untrained
users.
6. MAINTAIN tools with care. Keep cutting tools sharp and clean.
Properly
maintained
tools with sharp
cutting edges
are less likely to bind and are
easier
to control.
7. Keep sandpaper
clean, remove excess build-up
of
dust and debris.
Replace
sandpaper when worn, this will provide better sanding
results.
8. CHECK for misalignment
or binding of moving parts, breakage of parts,
and
any other condition that
may
affect the tool's operation. If damaged,
have the
tool serviced
before
using. Many accidents are caused by poorly
maintained
tools.
9. USE ONLY accessories that are recommended
for this tool. Accessories that
may be suitable
for
one
tool
may become hazardous
when used on
another tool.
I
/_
WARNING:
Empty dust bag before storage to help prevent possible fire
hazard, especially
when resin coating or linseed
oil
finishes
have been sanded.
ELECTRICAL
SAFETY
I
_
WARNING:
Do
not permit fingers to touch
the terminals
of plug when installing or removing
the plug from the outlet.
1.
Double insulated tools are equipped with a polarized
plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug
does not fit fully in the
outlet,
reverse the plug.
If
it still
does not fit, contact a qualified
electrician
to install a
polarized outlet. Do not change the plug in any way.
5
Cover
of
Grounded
Outlet
Box -------
@
®
@